AVS-ENOVADGX32-AUD-INS-EXT

Enova® DGX Audio Insert / Extract Board

DescriptionEnova DGX Audio Insert / Extract Board
Part #FG1058-700
Analog
Audio

WATCH THE VIDEO
Get an inside look at the features and technical capabilities of the all new Enova DGX family of Digital Media Switchers that include an integrated NetLinx Controller, embedded Ethernet switch, and can be populated with Enova DGX video input and output boards in addition to optional audio insert/extract boards.

TRAINING AVAILABLE
Learn important installation, configuration and programming techniques in the following course(s) from AMX University:

  • Getting Started with Enova DGX (Online)
  • Enova Solutions Design & Implementation (Classroom Course)

For schedules and registration for these and any AMX University courses, visit www.amx.com/training.

SPOTLIGHT: Enova
A new, innovative philosophy on how you think about A/V technology: Enova is part of an evolution to collaborate, communicate and educate using AV technology. Visit www.amx.com/enova/ to learn more.

AWARD WINNING PRODUCTS

Best New Product at InfoComm 2011: AMX's Enova DGX
The Enova converts analog and digital video and control, which runs through a 16x16 or 32x32 Enova Digital Media Switcher. The switcher also includes a gigabit Ethernet switch that's fully integrated. You get digital media, control and data on a single Cat5 cable. Here's the rAVe NOW video we shot at InfoComm.

OVERVIEW
The AVS-ENOVADGX32-AUD-INS-EXT is an audio insert / extract board for the Enova DGX 16 and Enova DGX 32. The board provides insert or extract access to the first 16 video input or output positions. The Enova DGX 16 and Enova DGX 32 enclosures both support one audio insert/extract board on the input side and one on the output side. The audio insert/extract board simplifies system design by allowing audio from a source located near the Enova DGX to be plugged directly into the system. This can dramatically reduce the overall cost of the system by eliminating the need for additional Transmitters or Receivers. Breakaway embedded audio and send to a separate audio system to be distributed throughout an environment.

COMMON APPLICATIONS
The Enova DGX Audio Insert / Extract Board is ideal for applications when local sources such as computers with analog audio outputs are plugged directly into the Enova DGX. Inserted audio can be embedded onto any Enova DGX output. The board also allows de-embed audio from Enova DGX HDMI inputs to be sent to a separate audio system.

FEATURES

  • De-embed Audio – Breakaway embedded audio from Enova DGX inputs and send to a separate audio system to distribute throughout an environment
  • Embed Audio – Insert local analog audio into pre-switched digital video paths or post switched digital audio paths depending on audio insert/extract board location
  • Individually Configurable – Each audio access point can be individually configured for insertion or extraction functionality
  • Hot Swappable – Easily add or replace I/O boards at any time after deployment - the system automatically recognizes the new configuration and activates the boards

SPECIFICATIONS

ANALOG AUDIO

AUDIO INSERTION
Audio Signal Type:
Analog Stereo, up to 16 channels per enclosure
Analog Input Level (Max):
+3 dBu, unbalanced
Input Impedance:
10k Ω
Analog to Digital Conversion:
48 kHz Sample Rate, 24-bit
Analog to Digital Reference Level:
+3 dBu = 0 dBfs
Optimal Analog Audio Operating Range:
-30 dBu to +2 dBu
Input Connectors:
8 pluggable, dual three-position, terminal blocks each containing two single-ended stereo contacts (supports 28 to 18 AWG)
AUDIO EXTRACTION
Audio Signal Type:
Analog Stereo, up to 16 channels per enclosure
Analog Output Level (Max):
+2.8 dBu, unbalanced.
Output Impedance Drive:
>= 5k Ω
Output Frequency Response:
<± 0.3 dB, 20 Hz to 20 kHz
Audio Output THD+N:
<0.04%, 1 kHz, -10dBu to +2.8dBu
Audio Out SNR:
>95 dB, 20 Hz to 20 kHz Vin=+3dBu
Digital to Analog Resolution:
24 bit, 2 Channel
Digital to Analog Reference Level:
0 dBfs = +3 dBu
Optimal Digital Audio Operating Range:
-30 dBfs to -2 dBfs
Audio Synchronization:
TBA
Output Connectors:
8 pluggable, dual three-position, terminal blocks each containing two single-ended stereo contacts (supports 28 to 18 AWG)


Note: Specifications are subject to change.


TRAINING AVAILABLE
Learn important installation, configuration and programming techniques in the following course(s) from AMX University:

  • Getting Started with Enova DGX (Online)
  • Enova Solutions Design & Implementation (Classroom Course)

For schedules and registration for these and any AMX University courses, visit www.amx.com/training.